Materials on Broken / Damaged Pallets
Detects loads resting on cracked, split or missing-board pallets that can collapse during handling.
More than 140 detections across nine risk categories, deployable across your CCTV infrastructure, MiBOT robots, and portable MiBOXX platforms with customizable detection models.
Detects loads resting on cracked, split or missing-board pallets that can collapse during handling.
Identifies loads stacked in multiple layers on rack beams beyond safe height or load limits.
Spots workers carrying materials while climbing or standing on ladders without three points of contact.
Flags personnel at height without a full-body harness clipped to a rated anchor point.
Scans slab edges, mezzanines and openings for missing handrails, mid-rails and toe boards.
Detects ladders with broken or missing rungs, damaged stiles or no securing at the top or base.
Identifies ladders left standing or lying across walkways, aisles and access routes.
Detects work above open areas where safety nets or catch platforms are required but absent.
Cross-checks work-at-height activity against permit tags and flags work with no valid permit.
Detects untagged or red-tagged scaffolds in use and scaffolds with missing couplers or pins.
Flags workers on formwork decks and edges without harness protection.
Detects forklift operations in shared areas without barricades separating pedestrians.
Identifies reversing or blind-spot forklift movements without a banksman guiding the operator.
Flags pedestrians walking inside marked forklift driveways and traffic lanes.
Detects crane and hoist lifts with no barricaded exclusion zone below the load path.
Computes the drop zone under crane hooks and suspended loads and flags anyone inside it.
Identifies open pits, trenches and manholes without barricades, covers or warning signs.
Identifies wet or icy floor patches in work areas before they cause slips and injuries.
Flags inefficient and unsafe manual carrying of materials inside cold storage areas.
Detects workers handling materials by hand without protective gloves.
Detects anyone in a designated PPE zone without the mandatory protective equipment.
Identifies workers missing a hard hat, high-visibility vest or safety shoes.
Flags PPE that is present but worn wrongly, such as an unbuckled helmet or open vest.
Detects workers in dusty operations without a respirator or dust mask.
Flags handling of sheet metal, glass and sharp materials without cut-resistant gloves.
Detects workers on site without the mandated boiler suit or coverall.
Flags high-risk tasks performed without specialised PPE such as face shields, FR gloves or air suits.
Tracks time spent in dust, fume and noise zones and flags exposure beyond safe limits.
Flags workers in food handling zones without gloves, hairnets or masks.
Detects welding, cutting or grinding with no fire extinguisher or fire blanket nearby.
Identifies flammable or combustible materials within the hot work danger radius.
Flags gas cylinders that are unchained, stored outside their cage or lying horizontally.
Detects oxygen and acetylene cylinders left unsecured or exposed to direct sunlight.
Identifies extinguishers, hydrants and hose reels blocked by materials or equipment.
Detects fire sand buckets that are empty or insufficiently filled.
Flags missing, faded or damaged fire safety and equipment signage.
Reads fire equipment inspection tags and flags expired or handwritten entries.
Detects stock or equipment stored too close to sprinkler heads and spray headers.
Identifies dented, cracked or corroded fire extinguisher and cabinet casings.
Flags fuel, oil and chemical unloading points operating without a drip tray.
Detects liquid leaks and spills around chemical storage and process areas.
Identifies chemical containers with missing, damaged or unreadable hazard labels.
Detects drums leaking or weeping liquid at seams, bungs or valves.
Flags cracks or breaches in bund and dyke walls that compromise spill containment.
Detects spills left uncontained or without warning signage around them.
Identifies oil sheen and contamination entering stormwater drains and channels.
Detects gas leak signatures around furnaces and fuel lines in manufacturing areas.
Early visual smoke and flame detection across terminal halls, electrical rooms, parking and baggage areas.
Flags crane and boom movements within the safe clearance distance of live overhead lines.
Detects live cables lying on the ground, across walkways or near standing water.
Identifies cables routed over sharp edges, doors or metal frames that can cut insulation.
Detects open distribution boards and missing covers exposing live parts.
Detects maintenance on electrical equipment without a verified lockout/tagout device.
Flags high-voltage maintenance without arc-rated clothing, insulated gloves or face protection.
Detects workers riding on hand pallet trucks instead of walking them.
Flags people travelling in goods-only lifts not rated for passengers.
Detects people standing or riding on forklift forks or raised pallets.
Identifies eating or drinking inside production and hazardous areas.
Detects mobile scaffolds and work platforms moved with workers still on them.
Flags running, pushing and horseplay in operational areas.
Detects harassment behaviour patterns and eve-teasing incidents in monitored areas.
Identifies alcohol consumption on site and in restricted work areas.
Detects smoking in no-smoking and flammable zones.
Detects overflowing bins and unhygienic areas around washrooms and waste points.
Flags waste thrown outside bins or dumped in non-designated areas.
Detects materials and equipment left obstructing walkways and aisles.
Identifies stock and pallets placed outside the marked yellow storage lines.
Detects pallets and materials stored in front of emergency exit doors.
Flags materials placed in front of fire extinguishers and hose reels.
Detects items left on walkways, ladder bases and staircases.
Identifies finished goods staged in front of emergency exits and escape routes.
Detects scrap, debris and waste accumulating on shop floors and work areas.
Flags piles of construction and demolition waste and plastic litter.
Detects clutter and combustibles around electrical panels and welding machines.
Identifies loose items and clutter inside equipment and vehicle cabins.
Flags waste placed in the wrong segregation bin, such as dry, wet or hazardous mix-ups.
Detects stagnant water collecting in pits, trenches and tunnels.
Identifies dust clouds from operations without water spray or suppression in place.
Flags worn floor markings, lane lines and missing exit signs.
Detects materials encroaching beyond the white pedestrian walkway lines.
Identifies material bins filled beyond capacity and spilling over.
Identifies rodents and pests in storage and food handling areas.
Flags gaps in continuous temperature records required under FSSAI HACCP.
Detects condensation and fogging inside cold rooms that hamper inspection and movement.
Detects manual call points with broken glass, missing covers or damage.
Identifies emergency exits that are locked, chained or physically obstructed.
Flags emergency exit signs that are off, dim or faulty.
Detects safety showers and eyewash stations that are blocked or damaged.
Identifies sudden collapse of a person, such as fainting or a medical emergency.
Monitors terminal emergency exits and flags any obstruction in real time.
Detects visible weapons such as aruvas, sickles and knives carried on site.
Matches faces against a watchlist and tracks flagged individuals across cameras.
Flags bags and objects left unattended beyond a set time.
Detects visitors, identified by white helmets, entering barricaded work zones.
Detects people and vehicles approaching or breaching airport perimeter boundaries.
Monitors airport parking zones for illegal parking and abandoned vehicles.
Monitors crowd density and plays automated audio alerts when limits are exceeded.
Detects snatching incidents in real time from public camera feeds.
Warns when people approach the buffer around hot zones and restricted areas.
Detects people moving too close to ponds, tanks and other water bodies.
Detects personnel on furnace structures while the furnace is operating.
Detects any person entering runways and restricted airside operational areas.
Continuously evaluates worker skeleton keypoints, perimeter scaffolding edges, and 3D suspended load drop cones in real-time.
Halt lift or overhead transit. Dispatch warning siren and log event in HSE incident system.